Welcome to the Free Talk Live bulletin board system!
This board is closed to new users and new posts.  Thank you to all our great mods and users over the years.  Details here.
185859 Posts in 9829 Topics by 1371 Members
Latest Member: cjt26
Home Help
+  The Free Talk Live BBS
|-+  LRN.FM - The Liberty Radio Network
| |-+  LRN.FM - The Liberty Radio Network
| | |-+  Optimizing the audio
Pages: [1] 2   Go Down

Author Topic: Optimizing the audio  (Read 12887 times)

0 Members and 1 Guest are viewing this topic.

KDus

  • Democracy=fraud
  • Offline Offline
  • Posts: 433
  • Money
    • View Profile
Optimizing the audio
« on: April 10, 2009, 08:10:38 PM »

With proper feedback, Ian will be able to adjust the levels so the average content is as loud and consistant as possible, with optimum use of the bit depth and codec.
I see a variation of 6 to 10 dB between shows. I also see drops up to 10dB during quiet parts of some shows. I'm using an RMS meter and I never see audio above about -8dB and typical levels around -15dB during the live news. The average during the show is around -10dB. The plug in I'm using claims to emulate analog meters but I can't be sure the 0dB is a +4 reference or 0dBFS.

Does anyone have a way to see what the peaks look like? I haven't found a plug in for WMP or Winamp, that will accurately show peak levels.

Logged
Liberate America!

FTL_Ian

  • Professional Iconoclast
  • Administrator
  • *****
  • Offline Offline
  • Posts: 10446
    • View Profile
    • Free Keene
Re: Optimizing the audio
« Reply #1 on: April 10, 2009, 09:32:04 PM »

I have sent emails to some providers asking them to be wary of their levels, but that hasn't done much.  Ideally I could use some sort of command-line normalizing program (or would hard limiting be better?) that I could automate and pass all the .mp3s through prior to airing them.  I looked into this briefly but gave up and just asked the program providers to keep an eye on their levels - obviously that hasn't worked too well.

I have an open channel on the Compellor so I could run it through the compellor twice...
Logged
Please support the show by joining the AMP program at http//amp.freetalklive.com

I blog at http://freekeene.com

FTL_Ian

  • Professional Iconoclast
  • Administrator
  • *****
  • Offline Offline
  • Posts: 10446
    • View Profile
    • Free Keene
Re: Optimizing the audio
« Reply #2 on: April 10, 2009, 09:44:26 PM »

I'm actually passing Molyneux, Gard, and Lew Rockwell through a LAME encoder to convert them to CBR as my automation software chokes on VBR, but the encoder doesn't seem to have any audio leveling features.   :(
Logged
Please support the show by joining the AMP program at http//amp.freetalklive.com

I blog at http://freekeene.com

BonerJoe

  • Guest
Re: Optimizing the audio
« Reply #3 on: April 10, 2009, 10:08:37 PM »

Logged

KDus

  • Democracy=fraud
  • Offline Offline
  • Posts: 433
  • Money
    • View Profile
Re: Optimizing the audio
« Reply #4 on: April 11, 2009, 05:31:43 PM »

Yes, normalizing the files would help, but real time processing can be tuned to do more. Hard limiting is the last step to tackle and, as you've heard, can get us into trouble because it undoes the tricks that MP3 type coding uses to throw away data.
Typical normalizing adjusts the overall level of a file so that the loudest peak determines the adjustment for the entire file. So, one click or pop could cause gain reduction and be counter productive. Some programs let you ignore click and pop, but then you're passing peaks that need to get limited later. It gets complicated fast, and there's no simple answer.
Step one is getting an automatic gain device to act like someone turning the volume up and down, to keep the average level the same.
The compellor is the tool for that job. Running two layers of compellor would only be useful if each channel is setup differently, The more I think about it, the more I think it is a good idea. I'll look at the book and see if one channel can be used for slow AGC, and the other for compression.
Logged
Liberate America!

FTL_Ian

  • Professional Iconoclast
  • Administrator
  • *****
  • Offline Offline
  • Posts: 10446
    • View Profile
    • Free Keene
Re: Optimizing the audio
« Reply #5 on: April 11, 2009, 07:18:04 PM »

What AGC device would you recommend?
Logged
Please support the show by joining the AMP program at http//amp.freetalklive.com

I blog at http://freekeene.com

KDus

  • Democracy=fraud
  • Offline Offline
  • Posts: 433
  • Money
    • View Profile
Re: Optimizing the audio
« Reply #6 on: April 14, 2009, 04:01:09 PM »

Depends on $$ Also, it's pretty specific to broadcast, so it usually comes in bigger processors. Vorsis is about $2500. Orban makes a processor for a PC, less than $1500. http://www.bswusa.com/proditem.asp?item=PC1101 Others are up to 13k A used Orban 8200 studio chassis would be great.

The Compellor acts like AGC when you turn the knob to "level". It is a broadband compressor at the other end of the dial. In between, it does both; quite well. However, the Compellor can only reduce gain. So, you have to drive it enough(input knob) to pass low audio with a little bit of reduction.
It's like a console fader that is all the way up. You need quiet audio to be turned up enough before the console to drive the meters to hit zeros. Then, you'll have enough room to pull the fader down when the audio gets loud. The compellor pulls the fader down for you, and nobody hears it happen.

The problem with using the channels seperately, is that you'd lose a smart feature within the Compellor that connects the leveling and compression so they cooperate to keep things smooth.

Here, all of the Compellors run about 10dB of leveling, all the time. So, the program can drop 10 dB and the Compellor will "release", and we get the same level out, all the time. We add some compression on top of the levelling, but it varies with the purpose of each feed.


Logged
Liberate America!

FTL_Ian

  • Professional Iconoclast
  • Administrator
  • *****
  • Offline Offline
  • Posts: 10446
    • View Profile
    • Free Keene
Re: Optimizing the audio
« Reply #7 on: April 16, 2009, 02:56:24 PM »

This is fancy looking:
http://www.bswusa.com/proditem.asp?item=VP-8

My concern is that I know very little about audio processing and am not sure if I can get the best out of these machines...
Logged
Please support the show by joining the AMP program at http//amp.freetalklive.com

I blog at http://freekeene.com

FTL_Ian

  • Professional Iconoclast
  • Administrator
  • *****
  • Offline Offline
  • Posts: 10446
    • View Profile
    • Free Keene
Re: Optimizing the audio
« Reply #8 on: April 16, 2009, 03:04:53 PM »

Would it be useful to set one side of the compellor to leveling and the other to compression?  If so, what order should I chain them?  Compress prior to leveling?
« Last Edit: April 16, 2009, 03:45:12 PM by FTL_Ian »
Logged
Please support the show by joining the AMP program at http//amp.freetalklive.com

I blog at http://freekeene.com

FTL_Ian

  • Professional Iconoclast
  • Administrator
  • *****
  • Offline Offline
  • Posts: 10446
    • View Profile
    • Free Keene
Re: Optimizing the audio
« Reply #9 on: April 16, 2009, 03:06:56 PM »

Logged
Please support the show by joining the AMP program at http//amp.freetalklive.com

I blog at http://freekeene.com

KDus

  • Democracy=fraud
  • Offline Offline
  • Posts: 433
  • Money
    • View Profile
Re: Optimizing the audio
« Reply #10 on: April 16, 2009, 08:28:01 PM »

Would it be useful to set one side of the compellor to leveling and the other to compression?  If so, what order should I chain them?  Compress prior to leveling?
No, I called Aphex again, and they say it would be counter productive. There are only a couple scenerios when it would be helpful.
If you're not getting what you want from a compellor, you're using it wrong.
First, check the input level. Are you using -10 RCA type levels or +4 XLR type to feed the APHEX? Make sure the button on the back, matches the signal level.

BTW, I'm running an Orban 8200 on my desk, and I need about 10dB of AGC to keep the stream processed. I do see about 5dB more level during your 8:00 hour, tonight, than last night.
« Last Edit: April 16, 2009, 08:35:14 PM by KDus »
Logged
Liberate America!

KDus

  • Democracy=fraud
  • Offline Offline
  • Posts: 433
  • Money
    • View Profile
Re: Optimizing the audio
« Reply #11 on: April 16, 2009, 08:43:10 PM »

This is fancy looking:
http://www.bswusa.com/proditem.asp?item=VP-8

My concern is that I know very little about audio processing and am not sure if I can get the best out of these machines...
I've looked at that one too!, I'm bidding on an Orban on ebay.

Dude, if you're willing to spend money for processing, just set a budget and go for it. Then all the broadcasters will benifit from one box on your end.

LOTS of processors have remote setup options, so you can let someone else tweak it; but I'd be surprised if a talk preset doesn't work great.

You could sell the current gear to recoup some money.
« Last Edit: April 16, 2009, 08:45:01 PM by KDus »
Logged
Liberate America!

KDus

  • Democracy=fraud
  • Offline Offline
  • Posts: 433
  • Money
    • View Profile
Re: Optimizing the audio
« Reply #12 on: April 16, 2009, 09:09:45 PM »

Try this:

http://besweet.notrace.dk/
That looks bad ass, but it requires some coding to set it up. I'm sure they're moving toward a GUI for everything but it doesn't look user friendly.
Logged
Liberate America!

FTL_Ian

  • Professional Iconoclast
  • Administrator
  • *****
  • Offline Offline
  • Posts: 10446
    • View Profile
    • Free Keene
Re: Optimizing the audio
« Reply #13 on: April 16, 2009, 11:19:23 PM »

Try this:

http://besweet.notrace.dk/
That looks bad ass, but it requires some coding to set it up. I'm sure they're moving toward a GUI for everything but it doesn't look user friendly.

I don't care about GUI.. I just need command line usability.  I've yet to look at this product.. downloaded it but haven't unzipped.
Logged
Please support the show by joining the AMP program at http//amp.freetalklive.com

I blog at http://freekeene.com

FTL_Ian

  • Professional Iconoclast
  • Administrator
  • *****
  • Offline Offline
  • Posts: 10446
    • View Profile
    • Free Keene
Re: Optimizing the audio
« Reply #14 on: April 16, 2009, 11:32:10 PM »

Would it be useful to set one side of the compellor to leveling and the other to compression?  If so, what order should I chain them?  Compress prior to leveling?
No, I called Aphex again, and they say it would be counter productive. There are only a couple scenerios when it would be helpful.
If you're not getting what you want from a compellor, you're using it wrong.
First, check the input level. Are you using -10 RCA type levels or +4 XLR type to feed the APHEX? Make sure the button on the back, matches the signal level.

BTW, I'm running an Orban 8200 on my desk, and I need about 10dB of AGC to keep the stream processed. I do see about 5dB more level during your 8:00 hour, tonight, than last night.

Input levels are fine.  Tonight one side of the Compellor was set to compress and the other to level.  I figure compress the peaks then level the compressed audio, you're saying this is counterproductive?
Logged
Please support the show by joining the AMP program at http//amp.freetalklive.com

I blog at http://freekeene.com
Pages: [1] 2   Go Up
+  The Free Talk Live BBS
|-+  LRN.FM - The Liberty Radio Network
| |-+  LRN.FM - The Liberty Radio Network
| | |-+  Optimizing the audio

// ]]>

Page created in 0.02 seconds with 33 queries.